About IDI Contact Us
•  Durable and affordable alternative for less complicated pressure requirements
•  Complete Unit ready to run
•  No assembly required. Unit arrives built to your specifications, tested and ready for installation
•  Reduced operating cost
•  No energy consumption to maintain position or pressure
•  Lower maintenance cost
•  No heat build up
•  Explosion proof operation

•  Single acting operation
•  Air to Hydraulic ratios available from 5:1 to 60:1 for pressure up to 5000 psi (340 bar)
•  All ratios come standard with a NFPA DO3 (CETOP 3) pad that can be used to mount a directional control valve or can be blocked if not required
•  TASQ Line pumps are compact: 4"x4"x9" w/o reservoir (100x100x228 mm) and lightweight: 11 lb. (5 kg)
•  Polymeric Dynamic Seals and Bearings Standard
•  Easily mounts on your existing reservoir or can be equipped with an optional 40 - 160 cu. in. (.65 - 2.61L) self contained reservoir

•  TASQ Series Product Manual (.pdf)
•  TASQ Series Performance Chart (.pdf)
•  TASQ Series Dimensions (.pdf)
•  TASQ Series Brochure (.pdf)
   
  More Documentation >>

A durable, air driven pump for intermittent flow and pressures with significantly longer service life.
Specifications:
•  Aircraft Grade Aluminum Housing
•  Twin PTFE Seals on Hard Chrome Piston Rod
•  DO3 Valve Pad with 1/4 NPT A, B & GA Ports
•  200 Mesh Suction Strainer
•  Twin 3/8 NPT Air Ports for Supply and/or Gage
•  Compatible with Most Hydraulic Oils
•  Requires Clean, Dry Regulated Air (150 psi max.)(10 bar)
•  No Lubricator Required

Home | Products | Applications | Documentation | Distributors | About IDI | Gallery | Contact Us | Distributors Only
© Interface Devices, Inc.
230 Depot Road  •  Milford, CT 06460
Voice: (203) 878-4648  •  Toll Free: (800) 539-0193  •  Fax: (203) 882-0885
info@interfacedevices.com